Finished Projects at your Fingertips
-
-
Finally worked out the kinks on the lazy Susan,so this table is done. I'm very happy with how it turned out.
#furnituremaker #madeinnz #customtable #lazysusantable
Button
-
I have been working away on this internal door set that will separate a media room from the rest of the house. At 2.5m tall I have used laminated 58mm square stock sapele, this will be ebonised. And my first time using JNF fully adjustable hinges too.
#furnituremaker #nz #madeinnz #frenchdoorsnz #frenchdoors #handmade
#customdoors
Button
-
Good progress on the Hex table
Button
-
Tea trolly finished up, Cherry with removable Maple/birch trays.
#furnituremaker #teatrolly #madeinnz #nzfurniture #customfurniture
Button
-
I went away for a week with the family and left this in my screw press.... It turned out perfectly. 2mm shop sawn veneer,24 bookmatched segments in Cherry for the lazy Susan part of the Hex table.
#furnituremaker #diningtable #lazysusan #madeinnz #nz
Button
-
Because I'm going to dig a giant hole in the table top to accept the lazy Susan, I'm adding this thickener to the underside of the table top. I have also carved out a nice pocket for the steel ring that connects the legs to the top.
#furnituremaker #customtable #diningtable #madeinnz #nz
Button
-
Hex table base is pretty well sorted.
#furnituremaker #madeinnz #customtable #diningtable #nz
Button
-
Here is the start of a special Hex table with built in lazy Susan, this will be a fun one.
#furnituremaker #customtable #diningtable #madeinnz #nz #handmadetable
Button
-
That's a big boy lazy Susan bearing,
Hot a fun table build coming up
#furnituremaker #madeinnz #diningtable
#custom table
Button
-
Here's a better look at what I came up with for these collapsible dining tables.
#furnituremaker #diningtable
Button
-
The first of 10 collapsible dining tables is standing and seems to work great.
9 to go then finishing the tops....
#furnituremaker #madeinnz #customtable
#diningtable
Button
-
I'm also in the middle of making 10x dining tables in Ash. Here is my solution to storing table tops during processing.
#furnituremaker #diningtable #madeinnz
Button
-
Part of a house lot of built in furniture, this is the guest wardrobe unit. In this job lot I have already made the kitchen, scullery,laundry, and have yet to make 2 master robes, an office suite and internal french doors. I won't get to install any of it for a couple of months yet....
#furnituremaker #builtinfurniture #custommade #customcabinetry #madeinnz #nz
Button
-
Working on a batch of 10 collapsible dining tables, for a party hire company, they will be used at weddings and the like.
#furnituremaker #diningtable #customtable #madeinnz #nz
Button
-
Another slim framed Oak kitchen in the works.
#customcabinetry #customkitchen #nz #madeinnz
Button
-
Classic little media side table to hold a 90s hifi stereo and drawers for CDs!
#furnituremaker #blackoak #madeinnz #nz #customcabinetry
Button
-
I merged a few ideas into one object here, I wanted to make a jewellery "box" for my wife's birthday but with the challenge of no box!
The result is a useful sculpture piece, made from walnut, rosewood and brass.
The tube is rolled veneer which was surprisingly easy to do!
#jewellerybox #furnituremaker #gift #prototype
Button
-
Delivered this "window " mirror today.
My client saw this in a different proportion and I changed it up to fit the space , looks great in this room.
#furnituremaker #madeinnz #mirror #custommirror #nz
Button
-
Bookcase moldings done.
#furnituremaker #bookcase #nz #madeinnz
#custombookcase #custommade #customcabinetry
Button
-
Ridiculous goings on making Scotia/crown molding the old fashioned way.
Button
-
Hey @truepositiontools thanks for that mech, happy to show some love to great products!
#furnituremaker #truepositiontools #thanks
Button
-
Bedroom load of cabinets finished off today.
Wardrobe, bedsides and vanity area. All push to open doors and drawers with built-in phone chargers and LED light's. Finish is Osmos white wash on Oak.
#furnituremaker #customwardrobe #custommade
#custombuiltins #madeinnz #nz #wardrobedesign
Button
-
This is my favourite style of cabinet door at the moment, very sleek version of a shaker door.
Button
-
This one bedside table as part of a bedroom suit I'm currently working on.
#furnituremaker #bedsidetable #ledlighting #madeinnz
Button
-
So the kitchen, bar, scullery and desk area are 98% done. Looking sharp.
#furnituremaker #kitchendesign #madeinnz #kitchen #custommade #custombuiltins
Button
-
Goog progress on this install. This is the bar and scullery so far.
#furnituremaker #customkitchen #madeinnz #customcabinets
Button
-
It's moving day!
Big ass kitchen finally leaving my workshop.
#furnituremaker #customkitchen #madeinnz
Button
-
The writing desk goes with the bookcase from my previous post. Made from EU Oak with Osmo Amber stain. And added power supply with power running up the back leg.
#furnituremaker #desk #writingdesk #librarydesk #madeinnz #nz
Button
-
Bookcase complete
#furnituremaker #bookcase #libraryladder #madeinnz #nz #library
Button
-
This desk is almost done and goes with the bookcase from the last post.
#furnituremaker #desk #madeinnz
Button
-
Took a bit longer than expected putting this ladder together but it's done and working great. Not to take this whole thing apart and start stain/finish with Osmo tints.
#furnituremaker #bookcase #libraryladder #madeinnz
Button
-
Hand cutting Scotia's for the top of the bookcase, one mostly done now to do another one and tidy up the join in the middle...
#furnituremaker #bookcase #madeinnz
Button
-
Little bookcase I'm working on
#furnituremaker #bookcase #madeinnz
Button
-
Delivered the outdoor table and bench seats.
Isn't great when your clients back yard is picture perfect!
#furnituremaker #outdoortable #madeinnz
Button
-
Outdoor table and 2 bench seats are complete.
Hopefully get some good pics tomorrow.
#furnituremaker #outdoortable #madeinnz
Button
-
Working on the top of this outdoor table, that's over 200 mortise and tenon's
Pre oiled the slats so glue up tomorrow morning...
#furnituremaker #outdoortable #madeinnz
Button
-
I have making cabinets for the last 7 weeks, so it feels so good to working some real wood!
The start of a pretty big outdoor table in Iroko.
#furnituremaker #outdoortable #madeinnz
Button
-
You know @mattestlea you should think about selling these things! Bloody awesome mate!
#newtools #furnituremaker
Button
-
I am always improving (or trying to) my process. on this job I have over 70 paint ready panels to make so this is how I go about currently.
Button
-
Awesome conclusion to the wood worker games with @wilker_dos beating @jimmydiresta 2 to 1
Myself, @robinlewismakes and @sawdustbureau essentially just finished 8 hrs of non stop live podcast. My voice is gone, I'm off to bed....
@wooddustaus #wooddustaustralia
Button
-
What an awesome first day of the Maker games at Wood Dust 2023! Awesome team work by everyone to get 3 projects made live on stage.
@wooddustaus @wilker_dos @jimmydiresta
#wooddustaustralia
Button
-
Had some fun talking to the international guests of Wood Dust about some of our antipodean slang!
Wood dust is just around the corner so grab a ticket
Button
-
Finished larch door from the other day. Door jamb is done too, I'm just waiting on some hardware so I can assemble it all.
#furnituremaker #larchdoor #customdoor #madeinnz
Button
-
Putting together a Larch door today.
#furnituremaker #customdoor #madeinnz
Button
-
Super happy to have these doors in looking sharp and functioning as planned. It was a windy wet day and as soon as the first door went up it transformed the outdoor space into a calm and dry extra room! Very happy with how this job turned out.
#furnituremaker #windbreakdoors #deckshelter #madeinnz #customdoors #slidingdoors #outdoorslidingdoor
Button
-
An update on the 6 giant sliding doors I'm making. They are all together and painted, ready for installation. They are 2.6 m tall and 1.5m wide and a pain in the butt to move around!
#madeinnz #customdoors #slidingdoors #outdoorslidingdoor
Button
-
Come one come all to wood dust 23 in Melbourne this May
Button
-
Another oversize barn door went in today.
At 2m wide and 2.2m tall you have to really think about the weight of the door, not only on the track but for ease of use too.
For this one I made my own hollow core door with a Pine frame and 6mm mdf skin.
#furnituremaker #barndoornz #barndoor #madeinnz #nz #customdoor
Button
-
Nice little bookcase/desk delivered today.
#furnituremaker #madeinnz #customdesk #nz #customcabinets
Button
-
Tidy little garage laundry installed today.
#custombuiltins #customcabinets #madeinnz #laundryroom #nz #furnituremaker
Button
-
Making a start on 2 sets of triple stacker outdoor sliding doors. They will enable my client to " close in" their deck from the weather/wind.
Here's a stack of bottom and top rails with 24 tenons cut, in laminated and pre primed Kwila.
#furnituremaker #outdoordoors #deckdoors #madeinnz #nz #customwoodwork
Button
-
First time using rattan in door panels. Pretty happy with this , and it's fairly easy to do.
#furnituremaker #rattanfurniture #customcabinets #desk #madeinnz #nz
Button
-
Finished up this vanity today. Painted Ash with rosewood.
#furnituremaker #customvanity #madeinnz
Button
-
Rosewood shutters delivered today
#shutters #madeinnz #customwoodwork
Button
-
Finished up this wall hung vanity today. Shop sawn oak veneer with infrared LED light switch hidden the veneer. Push open drawers with dovetailed strong backs to help keep the fronts flat and a classic polyurethane finish. Now I just have to wait for the house it's going in, to be finished....
Button
-
Pretty well finished up these 5 vanities. Just waiting on some bun feet from the turner.
My client has chosen to finish these themselves so that's as pretty as I'm going to see them.
#furnituremaker #customvanity #madeinnz
Button
-
Working on 5 of these vanities in 3 different sizes,
That top castle molding is a pain In the butt.
#furnituremaker #vanity #oakvanity #madeinnz
Button
-
Bookcase finished up today. Man that top crown piece took some man hours to get an acceptable finish but sure does set the piece off.
#furnituremaker #bookcase #oak #madeinnz
Button
-
I have been working on this Oak bookcase , today was scotia day, all hand planed with hollows and rounds . Swipe to see some of the progress shots
#furnituremaker #molding #handplaned #scotia #crownmolding #madeinnz
Button
-
Finished up the long table, AND the video is now live on my you tubes!
Button
-
I forked out for some custom cut high density polystyrene insulation for the ceiling and north wall of my workshop. Hopefully this will help with the heat radiation from the roof and noise of the rain
#workshop #insulation
Button
-
The big table is together and slides are working great! I have made up a 5th leg for the longer extensions too.
Now to do the final fit up of the tops and finish the top.
#furnituremaker #exstensiontable #nz #madeinnz #customtablenz
Button
-
Finally at the finishing stages on the long extension table. Still quite a bit to go but moving forward!
#furnituremaker #customtable #diningtable #extensiontable #madeinnz
Button
-
I was finally able to install this Cherry kitchen into a - not quite tiny house but very small house.
Last install this year done.
#customkitchen #customcabinets #madeinnz
Button
-
Finished up this wall unit with (fake) live edge oak slab today. It incorporates 2 small desk areas with light strips above and general storage below. With room for a 43in tv above.
#furnituremaker #tvwallunit #madeinnz #custombuiltins #customcabinets #custommadenz
Button
-
First time laying out the table tops for the big extension table I'm working on. Client has asked for another leaf too, so this table will end up 5.4m long!
#furnituremaker #extensiontable #madeinnz #customtablenz
Button
-
First time making a fake live edge slab.
Knotty oak a jig saw and some bleach, seemed to works well. Plus a light grey wash with osmo to blend it all together a bit.
#furnituremaker #fakeliveedge #customoakdesk
Button
-
Thanks again to @justin_dipalma for this great design for shop made table extensions.
#extensiontable #extensionslides #madeinnz #customtable
Button
-
Started working on another super long extension table. These make up one of the extension rails.
#furnituremaker #extensiontable #madeinnz #customtable
Button
-
A few pics of the kitchen I just made, for a commercial office space.
#madeinnz #customkitchen #customcabinets #furnituremaker
Button
-
Finished up this birch storage unit and kitchen in a commercial office space today.
#customkitchen #customcabinets #madeinnz
Button
-
Had a great day with Neil on his day long cabinet basics class today. We worked through cabinet design and practical tips and tricks to get what he needs done.
From design in sketch up through to making a small cabinet with doors and drawer.
#custommade #cabinetclass #shopclass #madeinnz #furnitureclass #furnituremaker
Button
-
Solar panels on the new workshop....
#workshop #solarpower
Button
-
Hey thanks for the care package @smith_makes ! Awesome work
#art #maker #awsomeart
Button
-
Nice little water fall action today
#furnituremaker #customkitchen #kitchendesign #madeinnz
Button
-
After a little rearrange in the workshop I have this great workflow with no lifting!
#furnituremaker #workshop #workflow
Button
-
Installed a couple of barn doors today, the first one is quite big at 2.2 wide and tall
Quite a lot of door to manouver into position!
#madeinnz
#furnituremaker
#barndoor
Button
-
First job going through the new workshop!
#furnituremaker #madeinnz
Button
-
-
Finished off this scullery wall today.
#custombuiltins #customkitchen #madeinnz #scullery
Button
-
Delivered this Rosewood BBQ table with built in electric BBQ/hot plate today, to a retirement village.
#bbqtable #madeinnz #outdoortable
Button
-
Working my way through a Cherry kitchen. This is the little island/ table . Tops are Cherry too and have an epoxy finish.
#customkitchen #madeinnz #cherrykitchen #kitchen #kitchenisland
Button
-
Good progress on the new workshop
#workshop #madeinnz
Button
-
Thank Odin!
Boy it has been a saga getting to this point, things are happening with my new workshop!
#furnituremaker #newworkshop
Button
-
I started this job about 1 year ago and for a myriad of reasons had been delayed with most of these cabinets being in storage. So I was just as surprised as anyone when it all went together relatively easily. This job includes the kitchen and island, bar area, scullery, laundry, mud room type storage and 5 vanities.
#kitchendesign #madeinnz #nzkitchen #customcabinets #custombuiltins
Button
-
Finished up these bedside tables with some quite specific dimentions and drawer setups. Always a pain to spray gloss too.
#furnituremaker #bedsidetable #bedside #madeinnz #customcabinets
Button
-
Finished up this corner wardrobe unit in a master bedroom.
#wardrobes #customwardeobe #madeinnz #nzwardrobe
Button
-
Pretty much finished up this Oak kitchen today, it's a relatively small space with quite a lot of storage.
#oakkitchen #kitchendesign #madeinnz #storagesolutions #nzkitchendesign
Button
-
Birch plywood wardrobe installed a week back.
#wardrobedesign #wardrobes #birchplywood #madeinnz
Button
-
Walnut tv wall unit is done!
There is a lot of work in this simple looking piece.
#furnituremaker #wallunit #tvunit #madeinnz #walnut
Button
-
Working on an Oak kitchen at the moment
#furnituremaker #kitchendesign #oakkitchen #madeinnz #kitchen
Button
-
Stage 1 if the large walnut bifolding tv unit is done, now to make all the panels to cover the wall to the left (the mantle) then when it's all complete it can all come down and go off to get sprayed.
#furnituremaker #customcabinets #walnut #madeinnz #tvunit #triplebifolds
Button
-
It's finally install week for this awesome beach front home. Wardrobes are pretty much done, tomorrow I start the huge walnut bifold tv unit cabinets.
#furnituremaker #wardrobedesign #curvedcabinets #madeinnz #wardrobe #birchplywood
Button
-
Installed this 4.8m long desk and storage unit this morning.
#furnituremaker #loungestorage #desk #madeinnz #oakveneer
Button
-
This has been a bit of a challenge,
This unit will hide the tv etc and join up to Walnut wall panels to the left. The carcass sits square to the wall but the front runs off on 5deg.
#custommade #furnituremaker #customcabinets #builtincabinets #madeinnz
Button
-
It took some time, but I was finally able to deliver this table to some happy clients this morning.
#furnituremaker #diningtable #diningtabledesign #madeinnz
Button
-
Installed the rounded wardrobe from a couple of posts ago today, it looks great with the vanity I made a while back in the adjoining ensuite
#furnituremaker #customwardrobe #customvanity #madeinnz
Button
-
Using my nonexistent luthiering skills to bend this 3mm Ash.
Meanwhile go check out the new episode of the shop stool podcast, we talk to Julian from @glencrossfurniture
#furnituremaker #bentwood #podcast #madeinnz
Button
-
This wardrobe is ready to be sprayed.
#furnituremaker #wardrobedesign #madeinnz
Button